ABB GPS4827, User Manual

Page: 58 / 96

Page 58
© Copyright 2021 ABB. All rights reserved.
Symbol Default Designation Default Severity Default LED Default Relay
HFV High Float Voltage Minor RECT None
HVA High Voltage Major RECT HV
LMR Limited Recharge Minor RECT None
LVD Low Voltage Disconnect Minor BAT None
LVDA Low Voltage Disconnect Fail Minor BAT None
MCM Major Communication Fail Minor CTLR None
MDF Module Failure Minor RM None
MOR Measurement Out Of Range Minor RM None
MTC Module Type Conflict Warning None None
NNC Number Not Configured Warning None None
OSA Open String Minor BAT None
PFD Password At Default Warning None None
PGI Program Line Invalid Major None None
PHT Processor Halt RO None None
POR Number Did Not Respond Warning None None
RLS1 Redundancy Loss Ninor RECT None
RPI Rectifier/Plant Inconsistency Warning None None
RTL Reserve Time Low Minor BAT None
SNC Shunt Not Configured Warning None None
STF Self Test Failed Minor CTLR CTLR
TPA Thermal Probe Failure Minor CTLR CTLR
URC User Relay Conflict Warning None None
VLA Very Low Voltage Critical BAT UR3
VSF Sense/Control Fuse Major CTLR CTLR
ZID ID Not Configured Major RECT None
Controller Alarm Severity, LED and Relay Default Values
(continued)
Table 9 - J:Controller Alarm Severity, LED and Relay Default Values