ABB GPS4827, User Manual

Page: 42 / 96

Page 42
© Copyright 2021 ABB. All rights reserved.
Thermal Probe
Without thermal probes, many of the controller ’ s battery management features will not function, or produce erroneous
results. Some features requiring thermal inputs are:
• Slope Thermal Compensation
• Reserve Time Prediction
• High Temperature Alarm
• Ambient High and Low Temperature Alarms
• High Temperature Disconnect
Step Action
NOTE:
The controller supports a number of thermal probe inputs. The type of probe used determines where it is
connected on the controller. Detailed thermal probe and battery management information may be found in
the User
’ s Guide for Millennium II Controller Advanced Features manual.
1.
The following table shows the type of probe and connector location on the Millennium:
Type of Probe Ordering Code
Controller Connection Location
10/30K
P3
210E Thermal Probe Mux
P3
1 Wire Temperature Monitoring
Devices
P7
Terminal Block Interface for 3
additional 10k probes or 210E
connection
TB2
Pin Description
1 Probe 2
2 Probe 2 RTN
3 Probe 3
4 Probe 3 RTN
5 Probe 4
6 Probe 4 RTN