ABB | E-Hub 2.0
38 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
HOW TO INSTALL THE PRODUCT | How to Replace the Mounting Bracket with the DIN Rail Mounting Clip or Vice Versa
How to Replace the DIN
Rail Mounting Clip with
the Mounting Bracket
To replace the DIN Rail Mounting Clip with the Mounting Bracket on the product, complete
the following steps:
1. Remove the 3 screws that hold the DIN Rail Mounting Clip in place
2. Remove the DIN Rail Mounting Clip
3. Place the 3 spacers (H = 4mm; Ext. diam. = 14mm; Int. diam. = 7mm) and the Mounting
Bracket
4. Tighten the 3 screws removed at step 1 by applying a torque of 0.7 Nm
Fig. 16
