ABB | E-Hub 2.0
HOW TO INSTALL THE PRODUCT | How to Replace the Mounting Bracket with the DIN Rail Mounting Clip or Vice Versa
37 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
2 - How to Replace the Mounting Bracket with the DIN Rail Mounting Clip or Vice Versa
How to Replace the
Mounting Bracket
with the DIN Rail
Mounting Clip
To replace the Mounting Bracket with the DIN Rail Mounting Clip on the product, complete
the following steps:
1. Remove the 3 screws that hold the Mounting Bracket in place
2. Remove the Mounting Bracket and the 3 spacers (H = 4mm; Ext. diam. = 14mm; Int. diam.
= 7mm)
3. Place the DIN Rail Mounting Clip
4. Tighten the 3 screws removed at step 1 by applying a torque of 0.7 Nm
Fig. 15
