ABB | E-Hub 2.0
26 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
INTERFACES IN DETAIL | Internal Cellular Modem (only for E-Hub 2.0 with 3G connectivity)
2 - Internal Cellular Modem (only for E-Hub 2.0 with 3G connectivity)
The E-Hub 2.0 supports the following Telit LE910 modem variants, according to product
versions based on the geographic area of usage:
Version
Modem variant
Technology
E-Hub 2.0 with 3G NA
Telit LE910-NA1 - North America
LTE Cat 1 3G Fallback
E-Hub 2.0 with 3G EU
Telit LE910C1-EU - Europe
LTE Cat 1 3G Fallback
The antennas connectors are placed on the front side.
Internal Cellular
Modem Specifications
(According to
Product Versions)
Product Features
• Rx Diversity and MIMO DL 2x2
• LTE FDD Cat.1, 3GPP compliant
• Built in UDP/TCP/FTP/SMTP stack
LTE Data
• Uplink up to 5 Mbps
• Downlink up to 10 Mbps
Supported RF Bands
TELIT LE910 variant
Technology
4G bands
3G bands
2G bands
LE910-NA1 - North
America
LTE Cat 1 (NA) 3G
Fallback
B2, B4, B5, B12/
B13
B2, B5
-
LE910C1-EU - Europe
LTE Cat 1 3G Fallback
B1, B3, B7, B8,
B20, B28A
B1, B3, B8
B3, B8
TX Output Power
Class 3 (0.2W, 23 dBm) @ LTE
LTE - Single Antenna
Operation Notes
Single LTE antenna operation can be supported; however, typically, wireless carriers
(Mobile Network Operators) impose restrictions. Please consult with your carrier before
considering single LTE antenna usage.
For optimum performance of the cellular interface, ABB recommends the use of both CELL
MAIN and CELL DIV antenna connectors.
