ABB | E-Hub 2.0
HOW TO INSTALL THE PRODUCT | Basic configuration of I/O
57 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
Parameters
Description
Default
Min
Minimum value for the measurement,
corresponding to the lower bound of input type.
0
Max
Maximum value for the measurement,
corresponding to the upper bound of input type.
100
NOTE
: Please configure the AI channels according to the real environment. The AI
channels data will be upload to the cloud after finishing the provision process.
DI setting
• Click
Modules
I/O module
• Inside I/O module page, select
Digital
tab to configure DI channels.
• DI could be configured as Pulse meter or Open/Close contact.
•
Pulse meter
: measuring value will be increased one weight at each pulse
•
Open/Close contact
: digital value 0 and 1 will be transferred into meaningful words set
in
status 0
and
status 1
.
Fig. 37
Parameters
Parameters
Description
Default
Name
AI channel name
AI Channel No.
Input type
DI input types for this channel:
Pulse meter
Open/Close contact
Pulse meter
Unit
Unit for the measurement
N/A
Pulse weight
Increment for Pulse meter.
0.1
Status 0
For Open/Close contact type:
Meaning of status 0
Status 0
Status 1
For Open/Close contact type:
Meaning of status 1
Status 1
NOTE
: Please configure the DI channels according to the real environment. The DI
channels’ data will be upload to the cloud after finishing the provision process. If
there is type changing in the DI channel, please do a re-provisioning process to
make the changes valid.
