ABB | E-Hub 2.0
DECLARATION OF CONFORMITY | Electromagnetic Compatibility
53 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
4 - Electromagnetic Compatibility
Electromagnetic
Compatibility (for EU)
Conditions of operation
This product meets the requirements of the EC Directive 2004/108/EC on electromagnetic
compatibility.
This product is designed for use in industrial areas.
FCC compliance (for USA)
This device and its accessories comply with part 15 of FCC rules. Operation is subject to the
following two conditions:
• This device and its accessories may not cause harmful interference.
• This device and its accessories must accept any interference received, including
interference that may cause undesired operation.
Specifications
Description
Processor
MCU
STM 32F072xx – 32 bit ARM Cortex M0
Memory
RAM
16KB SRAM with hardware parity
Storage
Embedded
128KB Flash
I/O interfaces
Digital Input
6x Digital Input Ports Input Range 0-36V
Optoisolation 5kV (2.7kV RMS) Low Level Voltage: 0-1V
High Level Voltage: 2-36V
0/1 Level Threshold: 1V/2V (Factory Option: Customizable)
Digital Output
4x Digital Output Ports Optoisolation 5kV(2.7kV RMS)
Open Drain Output Transistors: 60V (Optorelay) AC/
DC Output: 0.5A MOSFET (with 0.5A Fuses)
Analog Input
2x Current Analog Input Ports
Input Range: 4-20mA
2x Voltage Analog Input Ports
Input Range: 0-36V
ADC Conversion: 12 bit Sigma Delta Sampling
Frequency: 1kHz Max Input Protection Circuitry (5kV
DC)
Other
LEDs
4x Digital Output Status 2x Programmable
Power
Input
Provided by E-Hub 2.0
Consumption
0.3W Typical
Environment
Operating Temp
-25 °C to +85 °C
Storage Temp
-40 °C to +85 °C
Certifications
Regulatory
FCC/ISED, CE
Safety
EN 60950 (Including UL Deviations to EN62368-1)
Environmental
RoHS2; REACH
Ingress
IP40 (enclosure only, excluding connectors)
Mechanical
Enclosure
Material: ABS - Colour: aluminium
Dimensions
90.3 x 59 x 43.7 mm (WxLxH)
