ABB CPS3200U, Product Manual

Page: 53 / 64

Page 53
© 2021 ABB. All rights reserved.
11. Product Warranty
A
. Seller warrants to Customer only, that:
1. As of the date title to Products passes, Seller will have the right to sell, transfer, and assign such Products and
the title conveyed by Seller shall be good;
2. During the warranty period stated in Sub - Article B below, Seller ’ s Manufactured Products (products
manufactured by Seller), which have been paid for by Customer, will conform to industry standards and
Seller
’ s specifications and shall be free from material defects;
3. With respect to Vendor items (items not manufactured by Seller), Seller warrants that such Vendor items,
which have been paid for by Customer, will be free from material defects for a period of sixty (60) days
commencing from the date of shipment from Seller
’ s facility.
B. The Warranty Period listed below is applicable to Seller ’ s Manufactured Products furnished
pursuant to this Agreement, commencing from date of shipment from Seller ’ s facility, unless otherwise agreed
to in writing:
Warranty Period
The Warranty Period for a repaired Product or part thereof is six (6) months or, the remainder of the
unexpired term of the new Product Warranty Period, whichever is longer.
* The Warranty Period for a repaired Product or part thereof is six (6) months or, the remainder of the unexpired term of the new Product Warranty Period,
whichever is longer.
C. If, under normal and proper use during the applicable Warranty Period, a defect or nonconformity is identified in
a Product and Customer notifies Seller in writing of such defect or nonconformity promptly after Customer
discovers such defect or nonconformity, and follows Seller's instructions regarding return of defective or
nonconforming Products, Seller shall, at its option attempt first to repair or replace such Product without charge
at its facility or, if not feasible, provide a refund or credit based on the original purchase price and installation
charges if installed by Seller. Where Seller has elected to repair a Seller ’ s Manufactured Product (other than Cable
and Wire Products) which has been installed by Seller and Seller ascertains that the Product is not readily returnable
for repair, Seller will repair the Product at Customer
’ s site. With respect to Cable and Wire Products manufactured
by Seller which Seller elects to repair but which are not readily returnable for repair, whether or not installed by
Seller, Seller at its option, may repair the cable and Wire Products at Customer ’ s site.
D.
If Seller has elected to repair or replace a defective Product, Customer shall have the option of removing and
reinstalling or having Seller remove and reinstall the defective or nonconforming Product. The cost of the
removal and the reinstallation shall be borne by Customer. With respect to Cable and Wire Products, Customer
has the further responsibility, at its expense, to make the Cable and Wire Products accessible for repair or
replacement and to restore the site. Products returned for repair or replacement will be accepted by Seller only in
accordance with its instructions and procedures for such returns. The transportation expense associated with
returning such Product to Seller shall be borne by Customer. Seller shall pay the cost of transportation of the
repaired or replacing Product to the destination designated by Customer.