ABB CPS3200U Product Manual Download Page 8

Page: 8 / 64

Page 8

Customer Service Contacts

Customer Service, Customer Training, Technical Support, Product Repair and Return, and Warranty
Service

Services provided include initiating the spare parts procurement process, ordering documents, prod-
uct warranty administration, and providing other product and service information.

ABB Energy phones are staffed from 7:00 am to 5:00 pm USA Central Time Zone (GMT

6), Monday

through Friday, on normal business days. At other times, this number is still available, but for emer-
gencies only.

Calling from

•

United States, Canada, Puerto Rico,

and the US Virgin Islands

•

All other countries

Contact your local field support center or your sales representative to discuss your specific needs.

Line Power Systems Product Manuals and Software

Product manuals, technical support guides, product line brochures, and software are available on

line. Software includes Easy View and SNMP MIB.

abbpowerconversion.com

1. The USA direct country code for the country where the call is originating

+1 877

546

3243 ( US )

+1 972

244

9288 ( Int

’

l )

Summary of Contents for CPS3200U
















































Search results

Summary of Contents for CPS3200U

Reviews:

Related manuals for CPS3200U

Brands by name

Popular brands

ABB CPS3200U, Product Manual

Search results

Summary of Contents for CPS3200U

Reviews:

Related manuals for CPS3200U

Brands by name

Popular brands