ABB CoreSense M10, Installation Manual

Page: 72 / 96

72
Installation Guide
Understanding cabinet LEDs
—
Figure 55
Analytical unit status LEDs
On the analytical unit cabinet, only one LED at a time can light up, as such:
Solid Blinking
RED
ALARM
An alarm threshold has been reached by any of
the measured gases. For more information on
gas alarm thresholds, refer to the CoreSense
M10 User Guide. N/A
YELLOW
WARNING
A warning threshold has been reached by any of
the measured gases. For more information on
gas warning thresholds, refer to the CoreSense
M10 User Guide. The operating system is booting up.
GREEN
NORMAL
Normal operating conditions. The cabinet is starting up.
BLUE
MAINTENANCE
User attention is required as the sensor is either
operating outside its nominal specifications
or experimenting a fault condition. Consult the
event log and contact ABB. User attention is required as the last working
pump or source is being used. An event is
created accordingly and a service call should be
made.
NOTE: The blinking blue LED can be lit at
the same time as other LEDs since the
unresponsive source/pump problem can
happen independently of other problems.