manualshive.com logo in svg

ABB COM600 series 5.0, Technical Reference Manual

Share
Download
ABB COM600 series 5.0 Technical Reference Manual Download Page 23

The SNMP OPC Server supports the following features:

•

SNMP V1, SNMPv2c and SNMPV3 network monitoring

•

IEC 61850 data modeling

•

System supervision

•

SNMP channel communication

•

SNMP device communication

SNTP features

2.4.7.

The Simple Network Time Protocol (SNTP) is used for clock synchronization between
substation devices. Specifically, COM600 can act as an SNTP master to synchronize the
internal clocks of the protection and control IEDs (SNTP slaves), in the absence of a
dedicated GPS (SNTP server).

The SNTP OPC Server supports the following features:

•

OPC Data Access Server v. 1.0/2.0

•

OPC Alarms and Events server v. 1.10

•

SNTP client and server for time synchronization

23

COM600 series 5.0

1MRS758690

Master Protocols (Ethernet) and Applications Technical Refer-
ence Manual

Summary of Contents for COM600 series 5.0





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands