ABB COM600 3.4 User Manual Download | Manualshive

Page: 7 / 82

background image

About this manual

1.

Copyrights

1.1.

The information in this document is subject to change without notice and should not be
construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for any
errors that may appear in this document.

In no event shall ABB Oy be liable for direct, indirect, special, incidental, or consequential
damages of any nature or kind arising from the use of this document, nor shall ABB Oy
be liable for incidental or consequential damages arising from use of any software or
hardware described in this document.

This document and parts thereof must not be reproduced or copied without written per-
mission from ABB Oy, and the contents thereof must not be imparted to a third party
nor used for any unauthorized purpose.

The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.

© Copyright 2006 ABB. All rights reserved.

Trademarks

1.2.

ABB is a registered trademark of ABB Group. All other brand or product names men-
tioned in this document may be trademarks or registered trademarks of their respective
holders.

General

1.3.

This manual provides thorough information on the OPC Client for IEC 60870-5-101
Slave protocol (later referred to as IEC101 Slave OPC Client) and the central concepts
related to it. You find instructions on to take it into use. The basic operation procedures
are also discussed.

Information in this user’s manual is intended for application engineers who configure
IEC101 Slave OPC Client to establish communication to an OPC server.

As a prerequisite, you should understand IEC870-5-101 protocol and the basic procedures
in Station Automation Builder 600 (later referred to as SAB600).

This user’s manual is divided into following sections:

7

Station Automation COM600 3.4

1MRS755382

IEC 60870-5-101 Slave (OPC) User's Manual

«
...
5
6
7
8
9
...
»

Summary of Contents for COM600 3.4



















































































Reviews:

No comments

Related manuals for COM600 3.4

Brand: NEC Pages: 10

Brand: NEC Pages: 8

Brand: Baicells Pages: 8

grandMA2 Series

Brand: MA lighting Pages: 36

HiGain HLU-231 List 8F

Brand: ADC Pages: 7

Brand: FOR-A Pages: 39

PowerBeam AC Gen2

Brand: Ubiquiti Pages: 22

ER3-100 (5K02-55)

Brand: 8e6 Technologies Pages: 74

Brand: IDT Pages: 93

Brand: UfiSpace Pages: 35

Brand: Point of View Pages: 13

Brand: ebm-papst Pages: 11

Brand: IBASE Technology Pages: 39

MMAC-Plus 9G536-04

Brand: Cabletron Systems Pages: 42

BROADCAST POLLING FRAD BPF-14 BU

Brand: DCB Pages: 28

Brand: Acromag Pages: 35

Brand: Kontron Pages: 32

SATA II-150 PCI

Brand: SIIG Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands