manualshive.com logo in svg

ABB COM600 3.4, User Manual

Share
Download
ABB COM600 3.4 User Manual Download Page 8

Introduction

This section gives an overview of the IEC101 Slave OPC Client and states the system
requirements to be met when using the client.

Configuration

In this section you find an overview of the configuration tasks and instructions on
how to create and configure IEC101 Slave OPC Client related objects.

Operation

This section covers the basic operation procedures you can carry out when transferring
or activating Station Automation COM600 (later referred to as COM600) with new
configurations.

You are also given instructions on how to monitor and control the IEC101 commu-
nication.

Technical reference

This section contains a list of status codes and information about the IEC 61850 data
modeling.

Document conventions

1.4.

The following conventions are used for the presentation of material:

•

The words in names of screen elements (for example, the title in the title bar of a
window, the label for a field of a dialog box) are initially capitalized.

•

Capital letters are used for the name of a keyboard key if it is labeled on the keyboard.
For example, press the ENTER key.

•

Lowercase letters are used for the name of a keyboard key that is not labeled on the
keyboard. For example, the space bar, comma key, and so on.

•

Press CTRL+C indicates that you must hold down the CTRL key while pressing
the C key (to copy a selected object in this case).

•

Press ESC E C indicates that you press and release each key in sequence (to copy
a selected object in this case).

•

The names of push and toggle buttons are boldfaced. For example, click OK.

•

The names of menus and menu items are boldfaced. For example, the  File menu.

•

The following convention is used for menu operations: MenuName > Menu-
Item > CascadedMenuItem. For example: select File > New > Type.

•

The Start menu name always refers to the Start menu on the Windows taskbar.

•

System prompts/messages and user responses/input are shown in the Courier font.
For example, if you enter a value out of range, the following message is displayed:

8

1MRS755382

Station Automation COM600 3.4

IEC 60870-5-101 Slave (OPC) User's Manual

Summary of Contents for COM600 3.4



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands