GAA610-M
ADVANCED EMISSION GAS MONITORING SYSTEM | OI/GAA610-M-EN REV. B
59
Status messages
Information available as digital output
• System Failure
• Maintenance
• Maintenance Request
• Meas. Range Feedback SO
2
• SO
2
Range CTRL
Information displayed on the analyzer system
• Maintenance Mode
• Watchdog signal error (Communication error)
• Back-purging active
• Calibration active
• Condensate level alarm
• Cooler temperature limit
• Flow alarm min./max.
Possible status messages
Legend for the "status messages" table
Status Signals
No.
The status message number appears in the menu line display
Text
Full text of the status message is shown in the detailed display
S
x
= Status message sets the overall status
A
x
= Status message sets the "Error" individual status
W
x
= Status message sets the "Maintenance Request" individual status
F
x
= Status message sets the "Maintenance Mode" individual status
Reaction/Comment
Explanations and corrective measures in case of status messages
“Status messages” table
No.
Text
S A W F Reaction/Remark
Run time error
1–21
Runtime error 1 to
Runtime error 21
Notify Service if these messages occur repeatedly.
System controller
101
System controller shut down at
For information, shows date and time
102
System controller starts up at
For information, shows date and time as well as warm or cold start
103
Install Module:
For information
104
Remove Module:
For information
105
Reactivate Module:
For information
106
A user installed module:
For information
107
A user removed module:
For information
108
A user replaced module:
For information
109
A password is active! To delete, press the
<MEAS> key on the measurement value display.
For information on Password Protection see ‘Password protection’ section; not
logged. See
110
System booting.
Not logged
111
This system is currently under remote control
Not logged
112
Display/control unit synchronizing with analyzer.
Please wait.
Not logged
113
The system time was changed from -> to:
Not logged
114
The system is saving the changed parameters.
Please wait.
