ABB ACS 600 MultiDrive, Hardware Manual

Page: 69 / 94

Appendix A – ACS/ACC/ACP 604/607 Technical Data
ACS/ACC/ACP 604/607 Frequency Converters A-25
Applicable Standards
The ACS 600 complies with the following standards:
• EN 60204-1: 1992 + Corr. 1993 (IEC 204-1). Safety of machinery.
Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is
responsible for installing
- an emergency-stop device
- a supply disconnecting device (ACx 601 and ACx 604)
- the ACx 604 (IP 00) into a separate casing.
• EN 60529: 1991 (IEC 529), IEC 664-1: 1992. Degrees of protection
provided by enclosures (IP code).
• EN 61800-3 (1996): EMC product standard including specific test
methods.
Materials
Transportation
Position
ACx 604/607 Upright. ACx 604/607 units without du/dt filters can be
transported also on their back in their protective package.
'LVSRVDO
ACx 600 contains raw materials that should be recycled, thus
preserving energy and natural resources. Package materials of
ACx 600 units and options are environmentally compatible and
recyclable. All metal parts can be recycled. The plastic parts can either
be recycled or burned under controlled circumstances, according to
local regulations. If recycling is not feasible, all parts excluding
electrolytic capacitors can be landfilled. The DC capacitors of the unit
contain electrolyte which is classified as hazardous waste. (Location of
the electrolytic capacitors is shown on a sticker in the back of the front
cover, C11 to C13.) They must be removed and handled according to
local regulations.
For further information on environmental aspects, please contact your
local ABB distributor.
Enclosure (ACx 601)
Thickness of
Coating Color
PS (polystyrene) 3 mm NCS 1502-Y (RAL 90021 / PMS 420 C)
hot-dip zinc coated steel sheet 1.5 to 2 mm painted
with epoxy polyester powder paint 60
µ
m NCS 8502-Y (RAL 9004 / PMS 426 C) semigloss
anodised aluminium profile (R2 to R6) black ES 900
Enclosure (ACx 604/607)
hot-dip zinc coated steel sheet 1.5 to 2 mm with
polyester thermosetting powder coating
60
µ
m RAL 7035
Package (ACx 604/607)
wood or plywood (seaworthy package). Plastic covering of the package: PE-LD, bands PP or steel.