ABB ACS 600 MultiDrive, Hardware Manual

Page: 66 / 94

Appendix A – ACS/ACC/ACP 604/607 Technical Data
A-22 ACS/ACC/ACP 604/607 Frequency Converters
Application Programs
Various application programs are available for the ACS 600 frequency
converters. Not all selections are available for all types. One application
program at a time can be loaded in the memory of the frequency
converter.
Application Macros The macros of the application programs are introduced below.
ACS 600 Application Programs
Standard
Pump and Fan Control (PFC)
Master/Follower (M/F)
Spinning Control
Motion Control
Crane
System
Applic. Program Macros For...
Standard Factory basic industrial applications
Hand/Auto for local and remote operation
PID Control closed loop processes
Torque Control processes that require torque control
Sequential Control operation at preset constant speeds
User macro 1 & 2 user’s own customised parameter settings
Pump and Fan
Control
Pump and Fan
Control local and remote operation
Hand/Auto pump and fan station control
Master/Follower Master/Fo
macros included in
Standard
Application program drives which are coupled to each other
Spinning Control Spinning control running motor rotating bobbins in ring frame
machines
Motion Control Torque Control processes that require torque control
Speed Control closed loop speed control
Positioning point-to-point positioning
Synchronising positioning to moving target
User macro 1 & 2 user’s own customised parameter settings
Crane Crane normal crane drive
Master/Follower
Control two crane drive applications with Master/
Follower operation
User macro 1 & 2 user’s own customised parameter settings