Adding the Thermostat
Product Manual 2CQA 100 014 B0001
│
2018-09-28
│
5
2
Adding the Thermostat
STEP 1: Install the Thermostat
WARNING:
Installation must be performed by a licensed HVAC installer or electrical
professional. Improper installation can cause property damage, personal injury, or loss of life.
Install the device by following the
Operating Instructions
and
Wiring Guide
included in the
original packaging. After wiring is complete, take a photo of the connected wires and save for
future use.
Note:
When first powered, the device is in discovery mode for 30 minutes. This time period
allows the SysAP to see and connect to the device. During this time, the user can login to the
SysAP and add the device to the free@home network. If the Thermostat has been assigned to
a different SysAP, it will need to be reset. Please see
here
for instructions.
STEP 2: Open configuration and search for the Thermostat
Ensure that the SysAP is in Access Point mode by pressing the button on the SysAP. The
indicator light will turn solid blue. Connect to the SysAP by selecting it from the list in your
wireless network.
Once connected, open a browser and enter 192.168.2.1 in the address line.
If you have a tablet, use the free@home App.
Note:
it is not possible to set up the Thermostat by using a smartphone.
Log in as a user that has configuration rights.