Configuring the Thermostat
Product Manual 2CQA 100 014 B0001
│
2018-09-28
│
8
3
Configuring the Thermostat
STEP 1: Start the Configuration Wizard
Follow the instructions of the Configuration Wizard. To start the Wizard, click on the Thermostat
symbol in the floor plan, then click “Configuration” in the menu that appears on the right.
After the configuration is complete, the Thermostat will appear in the DEVICES List View:
Once you add a second Thermostat you will be asked if it is a Master or a Slave:
Please refer to section 2.1 for more information on “Master” and “Slave”.
STEP 2: Adapt the Settings, if required
The following table shows the Thermostat settings.
3.1
Thermostat Settings
Setting
Description
Options
Image
Temperature
correction
Sometimes
temperature shown
on Thermostat is
incorrect, i.e. due to
air draft. This setting
allows user to
correct temperature
value.
27 to 38 in
increments of 1
Presence
Detector
Timed On
Duration [s]
For future purposes.
Will be hidden in the
next software
version.
