ABB ABB-free@home TH-1.1 Product Manual Download Page 3

Page: 3 / 19

The Device

Product Manual 2CQA 100 014 B0001

│

2018-09-28

│

The Device

This section contains a short overview of the display and hardware functions of the device.

1.1

Function Overview

Heating & Cooling Indicators

Red and blue semi-circles indicate if device is heating (red), cooling
(blue), or idle (both off).

Room Temperature

Large number in middle of display shows current home temperature.

Setpoint Temperature

Small number above large number is desired temperature. Use arrows
to change. Both setpoint and arrows appear when your hand nears
device.

Note:

Setpoint can be changed in device settings.

Settings

Tap to activate or deactivate function. Switch between “active view”
and “settings view”.

Heating & Cooling

Tap to enable or disable heating/cooling mode.

Fan

Fan can be set to ON or AUTO mode. By default, it is in AUTO mode.
Tap to turn ON the fan.

Summary of Contents for ABB-free@home TH-1.1




















Search results

Summary of Contents for ABB-free@home TH-1.1

Reviews:

Related manuals for ABB-free@home TH-1.1

Brands by name

Popular brands

ABB ABB-free@home TH-1.1, Product Manual

Search results

Summary of Contents for ABB-free@home TH-1.1

Reviews:

Related manuals for ABB-free@home TH-1.1

Brands by name

Popular brands