Adding the Thermostat
Product Manual 2CQA 100 014 B0001
│
2018-09-28
│
6
Start Go to Settings > free@home radio > Search for wireless devices
The SysAP will now search for the Thermostat.
Note:
The Thermostat can only be found if the search starts within 30 minutes after the
Thermostat was connected to power. If the 30 minutes has elapsed, pull the Thermostat from
the wall and plug it in again to restart the 30 minutes.
The Thermostat will be found automatically and will be inserted into the configuration software.
Please wait until the Thermostat configuration is read. This may take up to 10 minutes.
STEP 3: Add the Thermostat to the floor plan
A. Go to “Devices”.
B. Click on “Temperature control”.
C. Click on “Thermostat”.
D. Drag the Thermostat symbol into the floor plan.
E. Choose the device from the list.
Note:
The device can be identified by its serial number or 3-digit code.
