ABB 8217 U-101-500 Product Manual Download

Page: 48 / 121

Operation

Product manual 2CKA001473B5281

│

Hearing the station of the flush-mounted radio on the external device

To play a favourite of the flush-mounted radio on an external device, the following settings must
have been made:

■

The "AUX" mode of the flush-mounted radio must be set on "AUX output".
– For setting AUX mode, see chapter 9.3.26 “Menu "Settings" - "AUX"“ on page 80.
– The favourite "AUX" is deactivated in the "AUX output" setting.

Fig. 30: Hearing music on a different device via AUX

To play a favourite of the flush-mounted radio on an external device, perform the following
steps:

1. Switch the flush-mounted radio on.

– After the device is switched on, the favourite that was last listened to is displayed.

2. Select the desired favourite [1] on the flush-mounted radio.
3. Switch on the external device.

– The operation of the external device depends on the respective device.
– The favourite of the flush-mounted radio is played on the external device.

Summary of Contents for 8217 U-101-500


























































































































Search results

Summary of Contents for 8217 U-101-500

Reviews:

Related manuals for 8217 U-101-500

Brands by name

Popular brands

ABB 8217 U-101-500, Product Manual

Search results

Summary of Contents for 8217 U-101-500

Reviews:

Related manuals for 8217 U-101-500

Brands by name

Popular brands