ABB 8217 U-101-500, Product Manual

Page: 117 / 121

FAQ and tips
Product manual 2CKA001473B5281 │ 117
Favourite "AUX" is not visible
■
The AUX mode in the device is set on "AUX output" or deactivated.
– To set the AUX mode of the device on "AUX input", see chapter 9.3.26 “Menu "Settings"
- "AUX"“ on page 80.
Favourite "Bluetooth" is not visible
■
The Bluetooth mode in the device is set on "Station".
– To set the Bluetooth mode of the device on "Receiver", see chapter 9.3.16 “Menu
"Bluetooth" - "Mode"“ on page 68.
Nothing can be heard on the flush-mounted radio.
If the Bluetooth icon is permanently displayed on the flush-mounted radio, the multimedia
device is connected.
■
The multimedia device is currently switched off (time out not yet reached).
■
The mute function on the multimedia device has been activated.
■
The volume on the multimedia device has been turned down to "Zero".
■
The player software of the multimedia device in pause mode.
– This could be the case especially after the connection has been temporarily disrupted.
■
You are at the boundary of the transmission range. While the signal is still strong enough to
maintain the connection, it is too weak to transmit sufficient data for playing music.
The multimedia device cannot be connected, even though the flush-mounted radio is
displayed in the Bluetooth settings.
■
A different multimedia device is already connected to the flush-mounted radio.
– Disconnect and uncouple the connected multimedia device in the flush-mounted radio.
– see chapter 9.3.19 “Menu "Bluetooth" – "Disconnect active device"“ on page 71
– see chapter 9.3.20 “Menu "Bluetooth" – "Uncoupling all devices"“ on page 72
You must then couple and connect your multimedia device again because the list of
coupled devices stored in the flush-mounted radio has been deleted.