ABB 8217 U-101-500 Product Manual Download Page 70

Page: 70 / 121

Operation

Product manual 2CKA001473B5281

│

9.3.18 Menu "Bluetooth" – "Couple device"

Fig. 53: Bluetooth

: Pair new device

This menu is only visible when the Bluetooth mode in the settings is set on "Station, see chapter
9.3.16 “Menu "Bluetooth" - "Mode"“ on page 68.

The menu is located in menu level "Bluetooth".

Via this menu you establish the pairing from the flush-mounted radio to a Bluetooth multimedia
device.

Pairing starting from the flush-mounted radio (only possible in Bluetooth mode "Station")

Use the following steps to establish the pairing:

1.  Switch to menu "Bluetooth".
2.  Switch to menu item "Pair new device".
3.  Switch to the submenu of menu item "Pair new device".

– The device switches to the list of available Bluetooth devices that are within range. If no

device is displayed in the list, no device is within the range of the flush-mounted radio.

– Please ensure that the device to be paired is switched on and the pairing mode is

activated there.

– The search for external Bluetooth devices takes place automatically. As soon as a

Bluetooth device is within range or leaves the range, the list is updated.

4. Use the "PLUS / MINUS" buttons to switch to the desired device.
5. Confirm the selection with a brief press of the "ENTER" button.

– The Bluetooth device is paired with the flush-mounted radio.

Pairing starting from the external Bluetooth device

Pairing starting from the external Bluetooth device is possible only in the "Receiver" mode of the
flush-mounted radio.

The operation of the external Bluetooth device depends on the external Bluetooth device.

The flush-mounted radio must be switched on for the pairing process.

■

Nothing special needs to be set on the flush-mounted radio.

■

No special function needs to be switched to in the flush-mounted radio.

Summary of Contents for 8217 U-101-500


























































































































Search results

Summary of Contents for 8217 U-101-500

Reviews:

Related manuals for 8217 U-101-500

Brands by name

Popular brands

ABB 8217 U-101-500, Product Manual

Search results

Summary of Contents for 8217 U-101-500

Reviews:

Related manuals for 8217 U-101-500

Brands by name

Popular brands