manualshive.com logo in svg

ABB 8217 U-101-500, Product Manual

Share
Download
ABB 8217 U-101-500 Product Manual Download Page 34

 

Operation

 

 

 

 

 

 

Product manual 2CKA001473B5281 

│

34

 

 

 

9.2.5 

Operating alarm clock / snooze function 

 

 

 

Fig. 23:  Alarm call function 

 

A beep is available for the alarm or playing of the radio. 

The active alarm call function is shown in the display [1]. 

The alarm signal is shown in the display when the alarm clock starts [2]. The beep or the radio 
gets gradually louder. 

The alarm can be interrupted for 5 minutes by pressing any button (snooze function). 

The alarm times, alarm profiles, etc. are set in the configuration menu of the device. 

■

 

Alarm profiles, see chapter 9.3.5 “Menu "Alarm clock" - "Alarm profiles"“ on page 55. 

■

 

Alarm times, see chapter 9.3.6 “Menu "Alarm clock" "Alarm times"“ on page 57. 

■

 

Signal tones, see chapter 9.3.8 “Menu "Alarm clock" – "Specifying "Signal tones"“ on page 
60. 

Switching the alarm clock on and off is carried out in the configuration menu of the device, see 
chapter 9.3.4 “Menu "Alarm clock" - "Alarm clock"“ on page 54. 

The maximum volume of the signal tone can be reduced, see chapter 9.3.25 “Menu "Settings - 
"Maximum volume"“ on page 79.  

 

 

 

Notice 

The alarm times must be entered before the alarm clock is turned on for the first 
time.  
–  Only then can the alarm clock be switched on. 
–  Only then can the alarm days be deactivated. 

 

 

Switching the alarm clock on or off 

The alarm clock is switched on or off in the configuration menu of the device, see chapter 9.3.4 
“Menu "Alarm clock" - "Alarm clock"“ on page 54. 

–  This prevents the alarm function from being inadvertently switched off via the button during 

standard operation. 

 

Interrupting the alarm clock (snooze function) 

Start the snooze function by pressing any button of the device. 

–  The snooze function can only be started during the signal tone. 

 

Behaviour of the alarm call function and the snooze function 

Summary of Contents for 8217 U-101-500


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands