ABB 8217 U-101-500 Product Manual Download

Page: 88 / 121

Operation

Product manual 2CKA001473B5281

│

9.3.34 Menu "Settings" - "Antenna"

Fig. 74: Antenna

The menu is located in menu level "Settings".

In this menu the available antennas are set.

Select from the following setting options:

Menu function

Description

Internal

The internal antenna of the device is being used.

External

The externally connected antenna of the device is being used.
– Antenna and antenna connection: see chapter 7.5.3 “Antenna“ on

page 25.

Table 21: Antenna

Use the following steps to set the antenna:

1.  Switch to menu item "Settings".
2.  Switch to menu item "Antenna".
3.  Use the "PLUS / MINUS" buttons to select the setting.
4.  Confirm the selection with the "ENTER" button.

Summary of Contents for 8217 U-101-500


























































































































Search results

Summary of Contents for 8217 U-101-500

Reviews:

Related manuals for 8217 U-101-500

Brands by name

Popular brands

ABB 8217 U-101-500, Product Manual

Search results

Summary of Contents for 8217 U-101-500

Reviews:

Related manuals for 8217 U-101-500

Brands by name

Popular brands