21/54
TLE Scalable Series 40 to 150 UL S1
UPS Installation Guide / REV-B
Anti-humidity & corrosion devices
Fig. 4.6-3 TLE Scalable Series 40 to 150
Location of the “Anti-Humidity & Corrosion devices”
The package of the TLE Scalable Series 40 to 150
includes the “Anti-Humidity & Corrosion devices”
against the formation of humidity and corrosion
during the transportation and the storage of the
UPS.
“Anti-Humidity & Corrosion devices” components:
A Humidity indicator
B Desiccant bag (2 pcs.)
C VCI foil base
D PE stretch foil
Warning!
It’s mandatory to remove the “Anti-
Humidity & Corrosion devices” during
the unpacking of the UPS!
Humidity indicator
Before removing the devices “C - VCI foil
base” & “D - PE stretch foil”, check the
status of the “A - Humidity indicator”.
10% to 70%:
The UPS can be commissioned.
80%:
The UPS shall not be commissioned.
Please contact your ABB Service Center.
Fig. 3.6-4 TLE Scalable Series 40 to 150
Location of the “Protective Foil”
Protective foil
TLE Scalable Series 40 to 150 is provided with a “Protective Foil”,
on the roof and door/front panels, to prevent material from
falling into UPS.
Warning!
It’s mandatory to remove the “Protective Foil” but
only just before the first start-up of the UPS as
indicated in the appropriate label!
The removal of the "Protective Foil" should be
performed only by an ABB Service Technician!
Packing material recycling!
ABB, in compliance with environment protection,
uses only environmentally friendly material.
UPS packing materials must be recycled in
compliance with all applicable regulations.
TLES
_UL
_04
0-15
0_S
1_U
PS An
ti-H
umid
ity_0
1
EP
O
EP
O
-
+
XA
Q1
I ON
0
O
FF
POWER MODULE 1
POWER MODULE 2
POWER MODULE 3
A
DESICCANT
B
HUMIDITY
INDICATOR
20
%
30
%
40
%
50
%
60
%
70
%
80
%
A
C
B
D
B
TLES_U
L_040-
150_
S1_UP
S prote
ctive fo
il_ABB
_01US
PROTECTIVE FOIL
to remove as indicated
in the label
PROTECTIVE FOIL
to remove as indicated
in the label
