169
KNOWING
YOUR VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
F0U156Ab
fig. 154
BOOT LIGHT fig. 154
To change the bulb, proceed as follows:
❒
open the boot;
❒
remove the light A by levering on the point shown
by the arrow.
❒
open the protective cover B and replace the press-
fitted bulb;
❒
re-close the protective cover B over the lens;
❒
refit the light A by inserting it in its correct position
firstly on one side and then on the other until it
clicks into place.
F0U159Ab
fig. 155
REPLACING FUSES
GENERAL INFORMATION
Fuses protect the electric system: they cut in (i.e. they
blow) in the event of a failure or improper action on the
system.
Check the state of the corresponding fuse when a
device does not work: the filament A-fig. 155 must be
intact. If it is, replace the blown fuse with another with
the same amperage (same colour).
B intact fuse;
C fuse with damaged filament.
