manualshive.com logo in svg

Abarth Abarth Punto Evo, Owner'S Handbook Manual

The Abarth Abarth Punto Evo Owner's Handbook Manual is the ultimate guide to understanding and operating your vehicle. This comprehensive manual covers every aspect of your car's features and functions, providing you with all the information you need to maximize your driving experience. Download it for free at manualshive.com and unlock the full potential of your Abarth Abarth Punto Evo.

Share
Download
background image

109

CONOSCENZA

DELLA

VETTURA

F0U106Ab

fig. 106

F0U107Ab

fig. 107

To unfasten the seat belts, press button C. Guide the
seat belt with your hand while it is rewinding, to prevent
it from twisting. 

Through the reel, the belt automatically adapts to the
body of the passenger wearing it, allowing freedom of
movement.

The reel may lock when the car is parked on a steep
slope: this is perfectly normal. Furthermore, the reel
mechanism locks the belt if it is pulled and in the event
of sudden braking, collisions and on high speed bends.

The rear seat is fitted with inertia seat belts with three
anchor points and a reel.

SAFETY BELTS

USING THE SEAT BELTS
fig. 106

The belt should be worn keeping the chest straight and
rested against the seat back.

To fasten the seat belts, hold the tongue A and insert it
into the buckle B, until the locking click is heard.

On removal, if it jams, let it rewind for a short stretch,
then pull it out again without jerking.

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

SAFETY

Summary of Contents for Abarth Punto Evo















































































































































































































































































Reviews:

No comments

Related manuals for Abarth Punto Evo

Camcar 40104 Mounting Instructions preview
40104
Brand: Camcar Pages: 6
Wallbox Commander 2 Installation And User Manual preview
Commander 2
Brand: Wallbox Pages: 7
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Safe Fleet PRIME DESIGN URX-001-E Manual preview
PRIME DESIGN URX-001-E
Brand: Safe Fleet Pages: 8
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Blue Ox BX1120 Installation Instructions preview
BX1120
Brand: Blue Ox Pages: 5
Chevrolet Chevy II 1965 Owner'S Manual preview
Chevy II 1965
Brand: Chevrolet Pages: 46
DRAGONFIRE 11-0800 Installation Instructions preview
11-0800
Brand: DRAGONFIRE Pages: 4
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3

Brands by name

Popular brands

Load more brands