manualshive.com logo in svg

Abarth Abarth Punto Evo, Owner'S Handbook Manual

The Abarth Abarth Punto Evo Owner's Handbook Manual is the ultimate guide to understanding and operating your vehicle. This comprehensive manual covers every aspect of your car's features and functions, providing you with all the information you need to maximize your driving experience. Download it for free at manualshive.com and unlock the full potential of your Abarth Abarth Punto Evo.

Share
Download
background image

181

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

Before towing, switch off the steering
lock (see “Starting device” paragraph in

the “Knowing your car” section). The power
brakes and power steering will not operate
while the vehicle is being towed. More effort on
the brake pedal and steering wheel will
therefore be required. Do not use flexible cables
when towing and avoid jerky movements. While
towing, make sure not to damage parts in
contact with the car. Respect the rules of the
highway code when towing the car, specifically
in relation to the towing device and road
conduct.

WARNING

The front and rear tow hooks should be
used only for emergency operations on

the road. You are allowed to tow the car for
short distances using an appropriate device in
accordance with the highway code (a rigid bar),
to move the vehicle on the road in readiness for
towing or transporting via a breakdown vehicle.
Tow hooks MUST NOT be used to tow vehicles
off the road or where there are obstacles and/or
for towing operations using cables or other non-
rigid devices. Respecting the above conditions,
towing must take place with the two vehicles
(one towing, the other towed) aligned as much
as possible along the same centre line.

WARNING

Summary of Contents for Abarth Punto Evo















































































































































































































































































Reviews:

No comments

Related manuals for Abarth Punto Evo

Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Phonocar VM350 Mounting Instructions preview
VM350
Brand: Phonocar Pages: 2
Chevrolet 2014 TRAX Owner'S Manual preview
2014 TRAX
Brand: Chevrolet Pages: 412
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
Mercedes-Benz 240 D 1979 Owner'S Manual preview
240 D 1979
Brand: Mercedes-Benz Pages: 91
travall TDG 1486 Fitting Instructions preview
TDG 1486
Brand: travall Pages: 4
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Voxx Electronics CA-510a Installation Instructions Manual preview
CA-510a
Brand: Voxx Electronics Pages: 15
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
TATA Motors NEXON Owner'S Manual preview
NEXON
Brand: TATA Motors Pages: 232
BrandMotion 212IFD001N User Manual preview
212IFD001N
Brand: BrandMotion Pages: 12
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17
HAKR HV1160 Quick Start Manual preview
HV1160
Brand: HAKR Pages: 2
Jeep 2014 All vehicles Warranty Information Booklet preview
2014 All vehicles
Brand: Jeep Pages: 44
NavLinkz RL4-MIB3-E Manual preview
RL4-MIB3-E
Brand: NavLinkz Pages: 24
VDO VIEWLINE TEMPERATURE GAUGES Product Information preview
VIEWLINE TEMPERATURE GAUGES
Brand: VDO Pages: 5

Brands by name

Popular brands

Load more brands