manualshive.com logo in svg

Abarth Abarth Punto Evo, Owner'S Handbook Manual

The Abarth Abarth Punto Evo Owner's Handbook Manual is the ultimate guide to understanding and operating your vehicle. This comprehensive manual covers every aspect of your car's features and functions, providing you with all the information you need to maximize your driving experience. Download it for free at manualshive.com and unlock the full potential of your Abarth Abarth Punto Evo.

Share
Download
background image

75

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

F0U073Ab

fig. 71

Keep the button pressed for longer than half a
second

to operate the automatic continuous winding of

the window. The window will stop when it is fully
opened or closed, or when the button is pressed again.

IMPORTANT With the ignition key at STOP or
removed, the electric windows remain activated for
about two minutes and are deactivated as soon as a
door is opened.

Passenger side door 

The front passenger door armrest features switch A-
fig. 71 for controlling the corresponding window.

Incorrect use of the power windows may
be dangerous. Before and during

operation, always check that no-one is exposed
to the risk of being injured either directly by the
moving window or through objects getting
caught or by being hit. When leaving the
vehicle, always remove the key from the ignition
to avoid the risk of injury to anyone remaining
in the car due to accidental operation of the
electric windows.

WARNING

Summary of Contents for Abarth Punto Evo















































































































































































































































































Reviews:

No comments

Related manuals for Abarth Punto Evo

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Opel 2011 Insignia Owner'S Manual preview
2011 Insignia
Brand: Opel Pages: 254
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8
Maserati MC 20 2022 Roadside Assistance Manual preview
MC 20 2022
Brand: Maserati Pages: 37
DRAGONFIRE 11-0800 Installation Instructions preview
11-0800
Brand: DRAGONFIRE Pages: 4
Stanley GLPS Instruction Manual preview
GLPS
Brand: Stanley Pages: 6
Saab 32 025 687 Installation Instructions Manual preview
32 025 687
Brand: Saab Pages: 9
Whispbar K408W Fitting Instructions Manual preview
K408W
Brand: Whispbar Pages: 15
Lincoln 2011 navigator Manual preview
2011 navigator
Brand: Lincoln Pages: 370

Brands by name

Popular brands

Load more brands