manualshive.com logo in svg

Abarth Abarth Punto Evo, Owner'S Handbook Manual

The Abarth Abarth Punto Evo Owner's Handbook Manual is the ultimate guide to understanding and operating your vehicle. This comprehensive manual covers every aspect of your car's features and functions, providing you with all the information you need to maximize your driving experience. Download it for free at manualshive.com and unlock the full potential of your Abarth Abarth Punto Evo.

Share
Download
background image

117

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

F0U115Ab

fig. 115

The diagram is indicative and for
assembly purposes only. Refer to the

instructions supplied with the child restraint for
the fastening.

WARNING

F0U114Ab

fig. 114

GROUP 2

Starting from 15 kg to 25 kg in weight, children may be
restrained directly using the car belts 
fig. 114. 
The only function of the seat is to position the child
correctly in relation to the belts, so that the diagonal
part adheres to the chest and not to the neck and that
the horizontal part clings to the child’s pelvis and not
the abdomen.

GROUP 3

For children from 22 kg up to 36 kg suitable risers make
fastening the seat belt easier.

Fig. 115 shows correct child seat positioning on the rear
seat.

Children taller than 1.50 m can wear seat belts like
adults.

The figure is indicative for fitting purposes
only. Refer to the instructions supplied

with the child restraint for the fastening.

WARNING

Summary of Contents for Abarth Punto Evo















































































































































































































































































Reviews:

No comments

Related manuals for Abarth Punto Evo

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
Racelogic Speed & Route Profiler Manual preview
Speed & Route Profiler
Brand: Racelogic Pages: 24
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Brand: iDataLink Pages: 6
GYS 029422 Manual preview
029422
Brand: GYS Pages: 32
Smappee EVB-1332-BL-E Installation Manual preview
EVB-1332-BL-E
Brand: Smappee Pages: 28
Pyle PLPSC8 User Manual preview
PLPSC8
Brand: Pyle Pages: 14
Honda Vezel Owner'S Manual preview
Vezel
Brand: Honda Pages: 279

Brands by name

Popular brands

Load more brands