manualshive.com logo in svg

Abarth Abarth Punto Evo, Owner'S Handbook Manual

The Abarth Abarth Punto Evo Owner's Handbook Manual is the ultimate guide to understanding and operating your vehicle. This comprehensive manual covers every aspect of your car's features and functions, providing you with all the information you need to maximize your driving experience. Download it for free at manualshive.com and unlock the full potential of your Abarth Abarth Punto Evo.

Share
Download
background image

Always check that the seat is properly
locked on the guides by trying to push it

backwards and forwards.

WARNING

The fabric upholstery of your car is
designed to withstand normal wear and
tear for a long time. Some precautions

are however needed. Avoid prolonged rubbing
against clothing accessories, such as metal
buckles, Velcro strips and the like, which by
applying a high pressure on the fabric in a small
area could cause the breakage of some threads
and damage the upholstery.

Backrest tilting fig. 21

To access the rear seats, pull handle A upwards: the
backrest will fold forwards and the seat will slide
forwards when you push the backrest. 

When you put the backrest back up, the seat will return
to its original position (mechanical memory).

fig. 21

F0U020Ab

32

REAR SEATS

To fold the rear seats, refer to the “Extending the boot”
paragraph in this section.

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

Summary of Contents for Abarth Punto Evo















































































































































































































































































Reviews:

No comments

Related manuals for Abarth Punto Evo

Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
TATA Motors Indigo MANZA QUADRAJET 90 Owner'S Manual & Service Book preview
Indigo MANZA QUADRAJET 90
Brand: TATA Motors Pages: 10
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Safe Fleet PRIME DESIGN URX-001-E Manual preview
PRIME DESIGN URX-001-E
Brand: Safe Fleet Pages: 8
Joie i-Level Instruction Manual preview
i-Level
Brand: Joie Pages: 53
Prorack K577W Fitting Instructions Manual preview
K577W
Brand: Prorack Pages: 15
newmotion Dynamic Power Management Home - Module Installation Instruction preview
Dynamic Power Management Home - Module
Brand: newmotion Pages: 20
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
Chevrolet Chevy II 1965 Owner'S Manual preview
Chevy II 1965
Brand: Chevrolet Pages: 46
EUFAB 16476 Operating Instructions Manual preview
16476
Brand: EUFAB Pages: 18
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
Buick 2006 LaCrosse Getting To Know Manual preview
2006 LaCrosse
Brand: Buick Pages: 20
Boyo VTSR100 User Manual preview
VTSR100
Brand: Boyo Pages: 2
Hollywood Racks HR4000 Assembly And Instruction Manual preview
HR4000
Brand: Hollywood Racks Pages: 8

Brands by name

Popular brands

Load more brands