Abarth 595, Owner'S Manual

Page: 125 / 225

IN
AN
E
ME
RG
E
N
C
Y
112
turn the bulb holder (2) fig. 108
anticlockwise and extract it;
remove the pressure-fitted bulb and
replace it;
refit the bulb holder (2) by turning it
clockwise and making sure that it locks
correctly;
refit the rubber cap;
refit the inner cover on the wheel
arch and tighten the screws.
FOG LIGHTS
(where provided)
For replacing these bulbs, contact an
Abarth Dealership.
REAR LIGHT CLUSTERS
To replace the bulb proceed as follows:
open the tailgate;
unscrew the two fastening screws
(1) fig. 109 and extract the light cluster
axially without rotating it;
remove the bulb holder from its
housing releasing it from the locking
tabs (2);
extract the bulbs by pushing them
slightly and turning them anticlockwise.
109
AB0A0313C
The bulbs are arranged as follows
fig. 110:
1: side / brake light;
2: direction indicators.
110
AB0A0314C
REVERSING LIGHT/REAR
FOG LIGHT
For bulb replacement, contact an
Abarth Dealership.
THIRD BRAKE LIGHTS
To replace the bulb proceed as follows:
remove the two guard caps and
unscrew the two fastening screws (1)
fig. 111;
111
AB0A0097C
remove the assembly;
disconnect the electrical connector
(2) fig. 112;
press the retaining device (3) fig. 112
and open the bulb holder;
112
AB0A0098C
remove the press-fitted bulb to be
replaced and replace it;