29
Depending on the temperature set by
the user, the automatic climate control
system automatically regulates the
temperature, flow and distribution of
the passenger compartment air, as
well as the recirculation function. These
settings can be changed by the user,
putting the climate control system in
manual mode (the LED on the AUTO 1
fig. 31 button turns off).
(1) AUTO button: automatic climate
control function on
(2) Button
: climate control system
compressor on or off. The LED on the
button is on when the compressor is
turned on.
(3) OFF button: turns the climate
control system off
(4) Button
: air recirculation
on or off. It is inadvisable to use
air recirculation when the outside
temperature is low, since the windows
could mist rapidly.
(5) Buttons
: temperature
setting. Pressing the
button
increases the passenger compartment
temperature, pressing the
button
decreases it. If the heating fluid
temperature is not sufficiently high, the
maximum fan speed does not come
on straight away in order to limit the
intake of insufficiently hot air into the
passenger compartment.
(6) Buttons
: fan speed
adjustment. Pressing the
button
increases the passenger compartment
air flow, pressing the
button
decreases it.
(7) Button
: directs air flow to the
windscreen and front side window
vents to demist or defrost them.
(8) Button
: directs air flow to the
central and side dashboard vents to
ventilate the body and face during the
hot season.
(9) Button
: directs air flow to the
front seat feet area vents. Due to the
natural tendency of heat to spread
upwards, this type of distribution
warms the passenger compartment
up as quickly as possible, providing an
immediate feeling of warmth.
(10) Button
: heated rear window
demisting/defrosting.
WARNING Do not apply stickers on
the inside of the rear window over the
heating filaments to avoid damage.
(11) Button
: front window fast
demisting/defrosting. The function
remains active for approximately 3
minutes after the coolant temperature
exceeds 50
°
C.
WARNING In warm-humid weather
conditions, using cold air on the
windscreen may cause external
condensation, which could limit
visibility.
SYSTEM SERVICING
In winter, the climate control system
must be turned on at least once a
month for about 10 minutes.
Have the system inspected at an
Abarth Dealership before the summer.
3)
IMPORTANT
3)
The system uses a coolant that is
compatible with the laws in force in
countries where the vehicle is sold, R134a
or R1234yf. When charging, only use the
gas indicated on the dedicated plate in
the engine compartment . The use of
other coolants affects the efficiency and
condition of the system. The lubricant
used for the compressor is also strictly
linked to the refrigerant gas type, refer to
the Abarth Dealership.
Summary of Contents for 595
