Abarth 595, Owner'S Manual

Page: 61 / 225

KN
O
W
IN
G
T
H
E
IN
ST
RUME
N
T
PAN
E
L
48
button down to return to the standard
screen without storing.
To cancel the setting, proceed as
follows:
press the MENU button briefly to
make the display flash "On";
press the
–
button, "Off" will flash on
the display;
press the MENU button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Trip B activation/data
This function may be used to activate
("On") or deactivate ("Off") the Trip B
(partial trip) display.
For further information see the “Trip
computer” paragraph in this chapter.
Proceed as follows to switch the
function on/off:
press the MENU button briefly,
the display will flash "On" or "Off"
depending on the previous setting;
press + or
–
button to select;
press the MENU button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Set Time (Setting the
clock)
Using this function, it is possible to
set the clock through two submenus:
"Time" and "Format".
To adjust, proceed as follows:
briefly press the MENU button:
the display will show the two submenus
“Time” and “Format”;
press the + or
–
button to move
between the two submenus;
once you have selected a submenu,
press the MENU button briefly;
when you select the “Time”
submenu, pressing the MENU
button briefly the display shows the
"hours";
press the + or
–
button to adjust;
briefly pressing the MENU button
the “minutes” are displayed;
press the + or
–
button to adjust.
Note The setting will increase or
decrease by one unit each time the +
or
–
button is pressed. Hold down the
button to increase/decrease the setting
rapidly and automatically. Complete the
adjustment with single presses of the
button when you approach the desired
value.
When you select the “Format”
submenu, pressing the MENU
button briefly the mode is displayed;
press
+
or
–
to select “24h” or “12h”.
When you have made the adjustment,
press SAVE to return to the submenu
screen or hold the button down to
return to the main menu screen without
storing.
hold the MENU button down
again to return to the standard screen
or to the main menu according to
where you are in the menu.
Set date (Setting the
date)
This function may be used to update
the date (year/month/day).
To adjust, proceed as follows:
briefly press the MENU button:
“year” will be displayed;
press the + or
–
button to adjust;
briefly press the MENU button:
"month" is displayed;
press the + or
–
button to adjust;
briefly press the MENU button:
“day” is displayed;
press the + or
–
button to adjust;
Note The setting will increase or
decrease by one unit each time the +
or
–
button is pressed. Hold down the
button to increase/decrease the setting
rapidly and automatically. Complete the
adjustment with single presses of the
button when you approach the desired
value.
Press SAVE to return to the menu
screen or hold the button down to
return to the standard screen without
storing.