Gemini 2000 Installation Manual v1.3
18
Shower Mount Fitting (Bath with roaming shower only)
Before the bath is installed or panels fitted, the shower head mount must be fitted.
There are 2 x pre-drilled holes on top of the bath where the mount will locate.
Note: The mount must be fitted so that
the outer screw cover is facing
away from the bath, as shown.
Using the fixings provided with the mount,
firmly secure the mount to the bath.
Next, the mount screw cap must be fitted.
Position the screw cover over the mount
from above, and when lined up correctly
press down firmly.
When correctly installed the top of the cover
will come flush with the top of the mount, as
below
