Bath plumbing connections will be made externally to the bath.
All bath plumbing is located on a bath plumbing bracket, which holds internal pipework in the
correct position to prevent any interference with framework etc. Therefore it is essential that
internal plumbing remains as shown below.
In some instances the plumbing bracket may be removed if necessary to help with bath
installation.
To gain access to the bracket mounting bolts, slide out the water feed pipes.
If this is the case, it is critical that the bracket is checked once fitted into position to ensure
there has been no movement in pipework.
It is essential that a measurement of 210mm is maintained between the stem elbows and the
22mm nylon pipe brackets as shown.
When reassembling the bracket to the frame for bath installation, use the 2 x M5 round head
allen bolts removed.
Gemini 2000 Installation Manual v1.3
19
Bath Plumbing Bracket
– Side wall plumbing
Pipework mounting bracket
210mm
Tap connections
Water feeds
Waste water outlet
