Gemini 2000 Installation Manual v1.3
24
Step 6
Repeat step 5 for opposite end of bath.
Step 7
Taking a middle side panel (protruding bolts in lower half), introduce to the 90 degree mounting
bracket fixed to the base frame.
Press the panel forwards locating the bolts into the bracket holes.
Fix the panel into place using 1 x large washer and 1 x M6 hex head nuts provided for each
bolt.
Note: these should not be tightened at this stage.
Click in the 2 fastmounts at each end of the panel.
Step 8
Repeat step 7 for the user side middle side panel.
Step 9
Check that the panels are aligned correctly, and are symmetrical each side relative to the
frame.
When satisfied that all 4 middle panels look as they should, tighten the nuts found in steps 6
and 7, this will add rigidity and prevent any further movement to these panels.
