20
ControlLogix® Controller and Memory Board
Publication
1756-IN101J-EN-P - November 2004
Install a CompactFlash Card in a Series B Controller
WARNING
When you insert or remove the CompactFlash card an
electrical arc can occur. This could cause an explosion in
hazardous location installations. Be sure that power is
removed or the area is nonhazardous before proceeding.
ATTENTION
If you are NOT sure of the contents of the CompactFlash
card,
before
you install the card turn the keyswitch of the
controller to the PROG position. Depending on the
contents of the card, a power cycle or fault could cause
the card to load a different project into the controller.
RS232
BATTERY
PORT
1-DCD
2-RXD
4-DTR
3-TXD
5-GND
DSR-6
CTS-8
RTS-7
N/C-9
1
2
BATTERY
DATE
UP
COMPACT
FLASH
2
To
Insert 1
To Eject
1 + 2
2
1
1
1. Turn the keyswitch to
the PROG position.
5. Release the latch and make sure it slides
over the CompactFlash card.
4. Insert the CompactFlash card.
The A-B logo points left.
3. Push the CompactFlash latch
to the left.
2. Open the door of the controller.
Summary of Contents for 1756-ENBT ControlLogix
Page 38: ...18 ControlLogix DC 10 31 2V Input Module Publication 1756 IN031D EN P February 2003 Notes ...
Page 39: ...ControlLogix DC 10 31 2V Input Module 19 Publication 1756 IN031D EN P February 2003 Notes ...
Page 63: ...ControlLogix Voltage Current Input Module 23 Publication 1756 IN039D EN P February 2003 Notes ...
Page 151: ...ControlLogix Voltage Current Output Module 19 Publication 1756 5 42 September 1999 ...
