ControlLogix™ Voltage/Current Input Module
11
Publication
1756-IN039D-EN-P - February 2003
2.
Connect the insulated wires to:
·
the RTB (as shown below) if the cable is grounded at the
field device.
or
·
the field device if the cable is grounded at the chassis.
Spring Clamp RTB
Cage Clamp RTB
20860-M
20859-M
1.
Strip 7/16 inch (11mm) maximum
length of wire.
2.
Insert the screwdriver into the
inner hole of the RTB.
3.
Insert the wire into the
open terminal and
remove the screwdriver.
1.
Strip 3/8 inch (9.5mm) maximum
length of wire.
2.
Insert the wire into the open terminal.
3.
Turn the screw clockwise to close the
terminal on the wire.
Summary of Contents for 1756-ENBT ControlLogix
Page 38: ...18 ControlLogix DC 10 31 2V Input Module Publication 1756 IN031D EN P February 2003 Notes ...
Page 39: ...ControlLogix DC 10 31 2V Input Module 19 Publication 1756 IN031D EN P February 2003 Notes ...
Page 63: ...ControlLogix Voltage Current Input Module 23 Publication 1756 IN039D EN P February 2003 Notes ...
Page 151: ...ControlLogix Voltage Current Output Module 19 Publication 1756 5 42 September 1999 ...
