ControlLogix® Controller and Memory Board
29
Publication
1756-IN101J-EN-P - November 2004
Update the Controller
1.
Connect the controller or chassis to the same network as your
workstation.
2.
Start ControlFLASH software.
3.
Choose
Next >
.
4.
Select the catalog number of the controller and choose
Next >
.
5.
Expand the network until you see the controller.
TIP
RSLogix 5000 software, revision 10.0 or later, lets
you update the firmware of a controller as part of
the download sequence. To update the controller,
download your project and follow the prompts of
the software.
IMPORTANT
If the required network is not shown, first
configure a driver for the network in RSLinx
software.
To expand a network one level, do
one of the following:
•
Double-click the network.
•
Select the network and
press the
→
key.
•
Click the + sign.
Workstation
Linx Gateways, Ethernet
driver
communication module
backplane
controller
−
+
−
−
−
+
Summary of Contents for 1756-ENBT ControlLogix
Page 38: ...18 ControlLogix DC 10 31 2V Input Module Publication 1756 IN031D EN P February 2003 Notes ...
Page 39: ...ControlLogix DC 10 31 2V Input Module 19 Publication 1756 IN031D EN P February 2003 Notes ...
Page 63: ...ControlLogix Voltage Current Input Module 23 Publication 1756 IN039D EN P February 2003 Notes ...
Page 151: ...ControlLogix Voltage Current Output Module 19 Publication 1756 5 42 September 1999 ...
