ControlLogix® Controller and Memory Board
17
Publication
1756-IN101J-EN-P - November 2004
Install the Memory Board
1.
Place the memory board over the connector and slide the
memory board into the controller.
2.
Pull the plastic back edge of the controller out slightly to clear
the tabs of the memory board.
3.
Line up the connectors.
4.
Place your hands on the boards over the connectors and
gently squeeze them together.
5.
Make sure that the tabs on the memory board extend through
the slots on the plastic housing of the controller.
40018
memory board
slot
slot
tab
tab
Summary of Contents for 1756-ENBT ControlLogix
Page 38: ...18 ControlLogix DC 10 31 2V Input Module Publication 1756 IN031D EN P February 2003 Notes ...
Page 39: ...ControlLogix DC 10 31 2V Input Module 19 Publication 1756 IN031D EN P February 2003 Notes ...
Page 63: ...ControlLogix Voltage Current Input Module 23 Publication 1756 IN039D EN P February 2003 Notes ...
Page 151: ...ControlLogix Voltage Current Output Module 19 Publication 1756 5 42 September 1999 ...
