Multi-Company Variant
210
Multi-Company Variant
Communications systems are frequently shared by several companies. These com-
panies want to jointly use the existing infrastructure (e.g. the existing lines and fea-
tures of the system), while at the same time they wish to organise and pay for their
communication completely independently of one another.
This “multi-company variant” can be implemented using the OpenCom 100 within a
shared office, for example.
In the multi-company variant, the companies are essentially completely independent
of one another. This allows them to have their own trunk lines, which is useful for
billing purposes. The OpenCom 100 hardware and software are used equally by all the
companies, however. It is possible to configure the OpenCom 100 for each company
and define the extent to which the features of the system may be used.
In brief, the features of the multi-company variant are as follows:
•
Up to 5 companies can be configured at the same time.
•
Every user of the OpenCom 100 is assigned to a company.
•
Each available bundle (trunk group) or SIP trunk is uniquely assigned to a
company so that incoming external calls can be transferred to the correct internal
subscriber.
•
For each company, every route can have its own code. For example, it is possible to
activate different routes with the code “0” for different companies. This enables
separate charging for outgoing external calls, for example.
•
An individual exchange (“operator”) can be set up for each company.
•
Each company can maintain the communication data of its business partners in its
own company telephone book.
•
The charges can be billed individually for each company.
Summary of Contents for OpenCom 100 series
