DECT over IP
®
151
2.
To log in to the dialogue, you enter:
User: “admin”
Password: “Admin”
3.
Enter the
MAC address
of the DECT over IP base station. The MAC address will be
printed on the label on the DECT over IP base station’s casing. Click on
List config-
uration
.
The DECT over IP base station’s current configuration will be displayed.
4.
Change the DECT over IP base station’s IP address configuration. Activate the
Use
local configuration
option (“yes”) and enter the required details:
–
IP address
: Static IP address of the DECT over IP base station
–
Net mask
: Subnet mask of the DECT over IP base station
–
OMM IP address
: IP address of the DECT over IP Manager. For the actual
DECT over IP Manager simply repeat the entry from the
IP address
entry field.
–
OMM port number;
Leave the default setting on “16321”.
–
PBX IP address
: IP address of the OpenCom 100
–
PBX port
: Leave the default setting on “8099”.
5.
Under
TFTP server address
enter the IP address the operating software is to be
downloaded from. This will usually be the Media Gateway card’s IP address (see
MGW Interface Card starting on page 119). Leave the
TFTP file name
setting on
the default setting (“/ram/ip_tel/ip_rfp.cnt”).
6.
For a remote location, the OpenCom 100’s LAN will usually be accessed via a (VPN)
router. Click on
Router addresses
:
[+]
. Enter the router’s IP address (“default
gateway”). Confirm by clicking on
Add
.
7.
Click on
Send config
to activate the desired IP address configuration.
Summary of Contents for OpenCom 100 series
