Aastra OpenCom 100 series, Mounting And Commissioning User Manual

Page: 198 / 256

Team Functions
196
Note
Only one function or call number can be programmed for each call key.
The following keys can be used:
• Trunk key : Calls (for the programmed call number, e.g. 11) are signalled to this key,
and you can make internal and external calls via this number. A trunk key can be
programmed with a substitute function (with another team member acting as the
substitute). Calls for you are then signalled to the terminal of another team
member. A trunk key also provides functions for managing calls. For example, you
can configure call protection if you do not want to be disturbed, or call diversion
to another telephone.
• Team key : As with a trunk key, a team key can be used to receive or make calls.
However, this key cannot be used to change the settings for managing calls; it is
not possible, for example, to configure call diversion to another telephone. Calls
made via a team key are signalled to all terminals with a trunk key that has been
programmed with the same number. For example, the team key with the number
11 calls all trunk keys with the number 11.
• Direct call key : Only outgoing calls can be made with a direct call key; they are
signalled to all terminals with the same number programmed to a trunk key. Calls
via a direct call key are signalled to the destination terminal even if that terminal
has been programmed with a substitution function or call protection. If the desti-
nation terminal has been configured for call diversion, the direct call is not
diverted.
Aastra 6775 (OpenPhone 75) and
Aastra 2775ip (OpenPhone 75 IPC)
with an additional key extension
Aastra M676 20 additional keys with a display
Up to three of these key extensions can
be used with an
Aastra 6775 (OpenPhone 75) and
Aastra 2775ip (OpenPhone 75 IPC).
Number of available call keys
Telephone Number of keys