Configuration Server
2-5
41-001390-00 Rev 02 – 12.2011
user config url
The URL to load the user configuration (<user>.cfg) file.
For example, user config url: http://10.55.102.56/aastracfg/usecfg
Note:
The “user config url” parameter supports tftp, ftp, http, https, however only ftp, http, and https can be authen-
ticated.
telephone integration url
The URL (http or https) that the BluStar 8000i calls to perform PBX integration. This is done during the login
sequence and later to activate/deactivate server side feature integration, such as DND, Call Forward, etc.
For example, telephony integration url: http://myserver.com/integration.php
telephony integration use login cre-
dentials
By default the BluStar 8000i uses SIP credentials to authenticate (digest method) to the PBX integration server.
Enabling this configuration parameter makes the BluStar 8000i use the user login/password instead.
For example, telephony integration use login credentials: 1
tftp server
The TFTP server’s IP address. If DHCP is enabled and the DHCP server provides the information, this field is auto-
matically populated. Use this parameter to change the IP address or domain name of the TFTP server. This will
become effective after this configuration file has been downloaded into the BluStar 8000i.
For example, tftp server: 192.168.0.130
Note:
For DHCP to automatically populate this parameter, your DHCP server must support Option 66.
tftp path
Specifies the path name for which the configuration files reside on the TFTP server for downloading to the BluS-
tar 8000i.
For example, tftp path: configs\tftp
Note:
Enter the path name in the form folderX\folderX. For example,
blustar8000i\configfiles.
ftp server
The FTP server’s IP address or network host name. This will become effective after this configuration file has
been downloaded into the BluStar 8000i.
For example, ftp server: 192.168.0.131
Optional
: You can also assign a username and password for access to the FTP server.
See the following parameters for setting username and password.
ftp path
Specifies the path name for which the configuration files reside on the FTP server for downloading to the BluS-
tar 8000i.
For example, ftp path: configs\ftp
If the BluStar 8000i‘s configuration and software files are located in a sub-directory beneath the server’s root
directory, the relative path to that sub-directory should be entered in this field.
ftp username
The username to enter for accessing the FTP server. This will become effective after this configuration file has
been downloaded into the BluStar 8000i.
For example, ftp username: aastraconfig
The BluStar 8000i supports usernames containing dots (“.”).
ftp password
The password to enter for accessing the FTP server. This will become effective after this configuration file has
been downloaded into the BluStar 8000i.
For example, ftp password: 1234
http server
The HTTP server’s IP address. This will become effective after this configuration file has been downloaded into
the BluStar 8000i.
For example, http server: 192.168.0.132
Optional: You can also assign an HTTP relative path to the HTTP server. See the next parameter (http path).
http path
Specifies the path name for which the configuration files reside on the HTTP server for downloading to the IP
BluStar 8000i.
For example: http path: blustar/1
If the BluStar 8000i’s configuration and firmware files are located in a sub-directory beneath the server’s HTTP
root directory, the relative path to that sub-directory should be entered in this field.
http port
Specifies the HTTP port that the server uses to load the configuration to the BluStar 8000i over HTTP. The
default port is 80.
For example: http port: 1025
Parameters in Configuration Files
Description
