BluStar 8000i Settings
41-001390-00 Rev 02 – 12.2011
4-10
Use the following procedure to enable/disable the call history on the BluStar 8000i.
Missed Calls Indicator
The history button will show a missed calls indicator that increments the number of missed calls. Once a user touches the
history button to view the missed calls, the missed calls indicator will disappear from the button.
You can enable and disable the missed calls indicator feature using the configuration files. When disabled, the missed calls
indicator does not increment as calls come into the BluStar 8000i.
When enabled, the number of calls that have not been answered increment on the history button. As the number of unan-
swered calls increment, the phone numbers associated with the calls are stored in the call history. The user can access the
call history and clear the calls from the list. Once the user accesses the history screen, the missed calls indicator on the his-
tory button is cleared.
To Retrieve Missed Calls:
Enabling/Disabling Missed Calls Indicator
You can enable (turn on) and disable (turn off ) the missed calls indicator on the BluStar 8000i using the “
missed calls indi-
cator disabled
” parameter in the configuration files. Valid values for this parameter are ‘0’ (enabled) and ‘1’ (disabled). If
this parameter is set to ‘0’, the indicator increments as unanswered calls come into the BluStar 8000i. If set to ‘1’, the indica-
tor does not increment the unanswered calls.
Use the following procedure to enable/disable the missed calls indicator on the BluStar 8000i.
Configuration Files
For the specific parameter(s) you can set in the configuration files, see Appendix A, the section,
.
Note:
You must have the call history button enabled in order to view the missed calls indicator.
1.
Touch the
history
button.
2.
Select the
missed
folder.
3.
Touch a contact button to call them.
OR
Touch the arrow on a contact button.
4.
Touch
+ add to contacts
or
add to favorites
.
5.
Touch the
history
button again to de-select it and close the search screen.
Configuration Files
For the specific parameter(s) you can set in the configuration files, see Appendix A, the section,
.