Operational, Basic Parameters
A-15
41-001390-00 Rev 02 – 12.2011
Parameter
–
https port
Configuration Files
–
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Specifies the HTTPS port that the server uses to load the configuration to the
BluStar 8000i over HTTPS.
Note:
For DHCP to automatically populate this parameter, your DHCP server
must support Option 66.
Format
Integer
Default Value
443
Range
1 through 65535
Example
https port: 1025
Parameter
–
auto resync mode
Configuration Files
–
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Determines whether the configuration server automatically updates the con-
figuration files or disables automatic updates. This parameter works with TFTP,
FTP, HTTP and HTTPS servers.
Valid values are:
None (0) - Disable auto-resync
Configuration Files (1) - Updates the configuration files on the BluStar 8000i
automatically at the specified time if the files on the server have changed.
Notes:
• Any changes made using the BluStar 8000i are not overwritten by an auto-
resync update. Auto-resync affects the configuration files only.
• The resync time is based on the local time of the BluStar 8000i.
• If the BluStar 8000i is in use (not idle) at the time of the resync check, the
reboot occurs when the BluStar 8000i becomes idle.
• The automatic update feature works with both encrypted and plain text con-
figuration files.
Format
Integer
Default Value
0
Range
0-1
0 (none)
1 (configuration files only)
Example
auto resync mode: 1
