Configuration Files
2-3
41-001390-00 Rev 02 – 12.2011
Using the Configuration Files
You must use a text-based editing application to open the configuration files (aastra.cfg, <mac>.cfg, or <user>.cfg) to
configure the BluStar 8000i.
Use the following procedure to add, delete, or change parameters and their settings in the configuration files.
Note:
Apply this procedure wherever this guide refers to configuring parameters using the configuration files.
Configuration Files
1.
Using a text-based editing application, open the configuration file that you want to configure the parameter in (either
aastra.cfg, <model>.cfg, <mac>.cfg, or <user>.cfg).
2.
Enter the required configuration parameters followed by the applicable value.
For example, in the <user>.cfg:
sip user name: 1010
3.
Save the changes and close the configuration file.
4.
If the parameter requires the BluStar 8000i to be restarted in order for it to take affect, use the
log off
app on the
BluStar 8000i UI.
