Aastra BLUESTAR 8000I, Pbx-Mode Administrator Manual

Page: 83 / 143

Advanced Operational Features
41-001390-00 Rev 02 – 12.2011
5-4
Example of a SIP NOTIFY with XML Content
NOTIFY sip:200@10.30.100.103:5060 SIP/2.0
Via: SIP/2.0/UDP 10.30.100.103:5060;branch=z9hG4bK7bbc1fac;rport
From: <sip:201@10.30.100.103:5060>;tag=81be2861f3
To: Jacky200 <sip:200@10.30.100.103:5060>
Contact: <sip:201@10.30.100.103>
Call-ID: 59638f5d95c9d301
CSeq: 4 NOTIFY
Max-Forwards: 70
Event: aastra-xml
Content-Type: application/xml
Content-Length: 115
<AastraBluStar>
<dnd>
<status>1</status>
</dnd>
</AastraBluStar>
When the BluStar 8000i receives the SIP NOTIFY, the XML content is processed as any XML object. In the above example,
the BluStar 8000i calls http://10.30.100.39/XMLtests/SampleTextScreen.xml after reception of the SIP NOTIFY.
Example of a SIP NOTIFY without XML Content
NOTIFY sip:200@10.30.100.103:5060 SIP/2.0
Via: SIP/2.0/UDP 10.30.100.103:5060;branch=z9hG4bK7bbc1fac;rport
From: <sip:201@10.30.100.103:5060>;tag=81be2861f3
To: Jacky200 <sip:200@10.30.100.103:5060>
Contact: <sip:201@10.30.100.103>
Call-ID: 59638f5d95c9d301
CSeq: 4 NOTIFY
Max-Forwards: 70
Event: aastra-xml
Content-Type: application/xml
Content-Length: 0
When the BluStar 8000i receives the SIP NOTIFY, it will trigger the “ action uri xml sip notify ” parameter, if it has been pre-
viously configured using the configuration files. If the “ action uri xml sip notify ” parameter is not configured, the BluStar
8000i does not do anything. On the phone side, a system administrator can enable or disable this SIP NOTIFY feature using
the configuration files. Also to ensure that the SIP NOTIFY is coming from a trusted source, it is recommended that you
enable the
Whitelist Proxy feature ( “sip whitelist” parameter) on the BluStar 8000i. If enabled, and the BluStar 8000i
receives a SIP NOTIFY from a server that is NOT on the whitelist, the BluStar 8000i rejects the message.
Enabling/Disabling XML SIP NOTIFY using the Configuration Files
To enable/disable the SIP NOTIFY event, you can set the “ sip xml notify event ” parameter in the configuration files. If the
content is missing in the SIP NOTIFY message received by the BluStar 8000i, the BluStar 8000i automatically uses the value
you specify for the “
action uri xml sip notify” parameter.
Use the following procedure to configure the XML SIP NOTIFY events:
Configuration Files
For the specific parameter(s) you can set in the configuration files, see Appendix A, the section, XML SIP Notify Settings
on page A-45 .